according to a recent announcement, the following business scopes of accredited testing laboratories for China CCC product were approved on 29 December 2018 by CNCA.
 
China Quality Certification Center South China Laboratory (15801) 
CNCA-C02-01: The following products in circuit switches and electrical equipment for protection or connection (electrical accessories) - Household and similar fixed electrical installations
 
Weikai Testing Technology Co., Ltd. (00501) 
CNCA-C16-01: Telecom Terminal Equipment
 
Beijing Product Quality Supervision and Inspection Institute (08101) 
CNCA-C02-01: The following products in circuit switches and electrical equipment for protection or connection (electrical accessories) - Switches for household and similar fixed electrical installations
 
China Inspection Group Southern Electronic Products Testing (Shenzhen) Co., Ltd. (02101) 
CNCA-C11-09: Automotive interior parts
 
Hebei Hongxing Testing Technology Service Group Co., Ltd. (21101) 
CNCA-C21-01: The following products in the decoration and decoration materials - Porcelain brick
 
Shanghai Jianke Inspection Co., Ltd. (21201) 
CNCA-C21-01: The following products in decoration and decoration materials - Solvent wood coating
 
Shenzhen Beitong Testing Co., Ltd. (21301) 
CNCA-C10-01: Lighting Appliance
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 
According to a recent press released from the Standardization Administration of the People's Republic of China (SAC),  46 GB Standards ("GuoBiao") are under revision. Here are some GB Standards that are relevant to automotive products: 
 
Passenger car tyres
Truck tyres
Retro reflector devices and conspicuity marking for power-driven vehicles and their trailers
Road illumination devices and systems for power-driven vehicles
Light-signalling devices(lamps) and systems for power-driven vehicles and their trailers
 
GB Standards in other industries, please see here.
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 
Source: SAC News
according to a recent announcement of CNCA, business scope of the following accredited testing laboratories for China CCC products was updated.
 
Zhejiang Fangyuan Testing Co. Ltd.
CNCA-C01-01: Wire and cable
CNCA-C02-01: Circuit Switch and Electrical Equipment for Protection or Connection (Electrical Accessories)
CNCA-C04-01: Low power motor
CNCA-C05-01: Power Tools
CNCA-C07-01: Household and similar equipment
CNCA-C10-01: Lighting Appliance
CNCA-C21-01: Decoration products
CNCA-C03-01: Low-voltage switchgear (short-time withstand current 420V 170kA 1s and below)
CNCA-C03-02: The following products in low-voltage components (short-circuit current strength 420V 250kA and below)
CNCA-C11-07: Motor vehicle exterior lighting and light signalling devices
CNCA-C11-15: Motorcycle occupant helmet
CNCA-C22-02: Toy Products
CNCA-C22-01: Baby carriage products
CNCA-C11-16: Electric bicycle
 
Zhejiang Kezheng Electronic Information Product Testing Co. Ltd.
CNCA-C09-01: Information Technology Equipment
CNCA-C16-01: The following products in telecom terminal equipment
 
National Special Wire and Cable Product Quality Supervision an Inspection Center
CNCA-C01-01: Wire and cable
 
Suzhou Product Quality Supervision Institute
CNCA-C02-01: Circuit Switch and Electrical Equipment for Protection or Connection (Electrical Accessories)
 
China Quality Attestation Center South China Laboratory
CNCA-C01-01: Wire and cable
CNCA-C02-01: The following products in circuit switches and electrical devices for protection or connection (electrical accessories)
CNCA-C04-01: Low power motor
CNCA-C07-01: The following products in household and similar equipment
CNCA-C10-01: The following products in lighting appliances
CNCA-C08-01: Audio and video equipment
CNCA-C09-01: Information Technology Equipment
CNCA-C16-01: The following products in telecom terminal equipment
CNCA-C11-09: Automotive interior parts
CNCA-C22-01: The following products in the stroller product
CNCA-C22-02: Toy Products
 
Centre Testing International Group Co. Ltd.
CNCA-C08-01: Audio and video equipment
CNCA-C09-01: Information Technology Equipment
CNCA-C10-01: Lighting Appliance
CNCA-C16-01: Telecom Terminal Equipment
CNCA-C22-02: Toy Products
 
For general information on the China CCC Certification please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 
according to a recent announcement of the General Office of the Chinese State Council, the holiday Schedule for the new year 2019 is as follows:
 
29 December 2018 (Saturday): normal working day,
30 December 2018 (Sunday) - 1 January 2019 (Tuesday): New Year holidays, beginning work on 2 January 2019,
February 2019 (Saturday) - 3 February 2019 (Sunday): normal working day,
4 February 2019 (Monday) - 10 February 2019 (Sunday): Spring Festival holiday, beginning work on 11 February 2019.
 
That means, Chinese government authories as well as China Certification Organisations (e.g. CQC, CCAP, CAQC, etc.) will be closed at the end of the year 2018 as well as during the chinese spring festival in February 2019. Please take this into consideration, that it may cause delays in the China CCC certification processes. 
 
For general information on the China CCC please look through the chapter CCC procedure. If you have any questions, please use the Contact Us page.
 
According to a recent press released from the State Administration for Market Regulation ("SAMR") and the Standardization Administration of the People's Republic of China (SAC), 7 New GB Standards ("GB", "GuoBiao") were released on 28 September 2018. They will be implemented on 01 April 2019.
 
GB/T 36668.1-2018 Status monitoring and fault diagnosis of rides - Part 1: General
 
GB/T 36668.2-2018 Amusement facilities condition monitoring and fault diagnosis Part 2: Acoustic emission monitoring method
 
GB/T 36668.3-2018 State of the ride monitoring and fault diagnosis - Part 3: Infrared thermal imaging monitoring method
 
GB/T 36721-2018 Museum Open Service Specification
 
GB/T 36736-2018 Flower Recreation Area Construction and Service Specification
 
GB/T 36737-2018 leisure greenway service specification
 
GB/T 36740-2018 Business and Leisure Area Service Specification
 
If you have any questions, please use the Contact Us page. For general information on the China CCC please look through the chapter CCC procedure.

Source: SAC News

On October 22, 2018, Premier Li Keqiang presided over the State Council executive meeting. At the meeting, it was decided to further promote the implementation of the business environment policy, establish a private enterprise bond financing support tool, and build a national “Internet + supervision” system. It was also mentioned at the meeting that in order to further reduce the burden on enterprises, it was decided to cancel more than 10% of the types of products subject to China Compulsory Certification (China CCC) or to implement them by CCC self-declaration. 

For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

Source: Chinese Government News

 

CNCA ("Certification and Accreditation Administration of PRC") published a list of new testing labs for China CCC products on 11 Oktober 2018:

Laboratory no. Name Business Scope
13001 CQC Intime Testing Technology Co.,Ltd. CNCA-C01-01: Wire and cable
CNCA-C11-09: Automotive interior parts
17201 China General Certification Center Guangzhou Branch CNCA-C04-01: Low power motor
21001 NHT JiuXi Testing Lab CNCA-C11-09: Automotive interior parts
10701 Chongqing Measure Quality Detection Institute CNCA-C07-01: Household and similar equipment
20601 Shenzhen Intertek, Guangzhou Branch CNCA-C07-01: Household and similar equipment
00202 Beijing TIRT Technology Service Co., Ltd. Suzhou Branch CNCA-C10-01: Lighting Appliance
18701 PTC-Testing and Certification Co., Ltd CNCA-C10-01: Lighting Appliance

Further information can be found at  CNCA Announcement (No.38, 2018)

For general information about the China CCC, please look at chapter CCC through CCC procedure. If you have any questions, please contact us.

On October 1st, the China CCC Certification Self-Declaration compliance information reporting system is officially launched. From now on, companies that apply for the China CCC certification for specific products may voluntarily use self-declaration methods to prove that their products continue to meet the relevant requirements of China CCC certification and after the product conformity information is reported, the CCC Mark is added to the product. This new certification process is the latest method in the reform of the China Compulsory Certification system, which will further reduce the cost of enterprises, strengthen the responsibility of market entities, optimize the business environment, and stimulate market vitality.
 
In accordance with the "Opinions of the State Council on Strengthening the Construction of Quality Certification System to Promote Total Quality Management" (Guo Fa [2018] No. 3), in June this year, the State Administration for Market Regulation (SAMR) and the Certification and Accreditation Administration (CNCA) jointly issued the Catalogue on Reform and Adjustment of China Compulsory Certification and Announcement of the Implementation Regulations (No.11.2018 SAMR), a number of products in the certification catalogue has been reduced from 160 to 141. At the same time, the audio and video equipment, information technology equipment, low-voltage electrical appliances, low-power electric motors, electric welders, 20 products with stable quality and low safety risk in the fields of household and similar equipment, motor vehicles and safety accessories, etc. allowing companies to use self-declaration evaluation methods instead of third-party certification. Companies can continue choosing to use the current third-party China CCC certificaiton process, e.g. CQC, CCAP, CAQC, etc.
 
The contact person who is in charge of the Certification and Supervision Department of the State Administration for Market Regulation (SAMR) introduced that the self-declaration evaluation method will, on the one hand, help the company to speed up and increase the efficiency of product development, effectively reduce institutional transaction costs, and stimulate independent innovation. And on the other hand, the self-declaration evaluation method puts forward higher requirements for enterprises to assume responsibility for quality risks. By strengthening post-event supervision, it increases penalties for violations of laws and regulations, and helps to strengthen the sense of responsibility of enterprises, to create a fair market environment. In addition to this, the self-declaration compliance information reporting system is the information base of big data supervision, and the system is connected with the national enterprise credit information system to achieve a limited situation of dishonesty, which helps to promote corporate quality and integrity system construction to improve market supervision efficiency.
 
Source: News SAMR
 
For general information about the China CCC please look at chapter CCC through CCC procedure. If you have any questions, please contact us

Support

Unterstützung

You work at your pace. You can handle your projects independently via our portal, as well as inquire about personal support. We have therefore committed ourselves to give you the opportunity to design your own processes, without having to give up the support through our portal through us

Online Administration

Online Verwaltung

We offer you the opportunity to carry out your certification processes yourself, but without having to forego the know-how or the support of experienced employees. The online system is designed for a variety of certifications and offers you also FAQ lists, as well as ready-made forms and tables, as well as a module to clarify open questions with one of our employees.

Change Certification

Change Certification

In our fast time changes in business life are a constant accompaniment. Fixed structures that used to build up over many years can now be smashed very quickly. There are internal and external reasons for this. The CS gives an overview of the conformity during changes.

Cooperation

Kooperationen

Since we all only have a limited time and financial capacity, and want to offer the customer a comprehensive service, cooperations only make sense among related organizations. These have a reliable structure, as well as a good interpersonal harmony.

Go to top